Amplifiers

'- Max power output 2 x 75W 4 Ohm - RMS output 2 x 25W 4 Ohm - 3.5mm Aux In or RCA Input - Input Sensitivity - 130mV - 2.5V - Input level control - Low pass/High pass filter - 80Hz-120Hz - Short circuit protection - Thermal protection - Dimensions: 78 x 10

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. The CX 1200.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class D power plant, this amp features a variable bass boost with KickEQ, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Fuse rating: 150A Cable guage: 4 AWG This CX amplifier delivers as much as 1200 watts into one channel. See below for more details. RMS Power - 14.4V 2 Ohm mono = 1% THD+N : 1200 W x 1 - Length - 12 1/16" (31 cm) - Height - 2 3/8" (6 cm) - Width - 7 3/16" (18 cm) - Frequency Response - 25-200 Hz (+/- 1 dB) - Signal-to-Noise Ratio - >95dB A-weighted, re: rated power - Input Sensitivity Low Level - 125mV-5V - Input Sensitivity High Level - 250mV-10V - Active Crossover - 50-200 Hz, 12dB/octave low pass only - Subsonic Filter - 25 Hz, 24dB/octave - KickEQ Boost - variable +12dB, centred at 40 Hz - Remote Bass - Sold Seperately

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. The CX 600.5 Amplifier is built to be the complete package in one cool looking amp. This CX amplifier uses powerful Class A/B technology to power 4 mid/high range channels and an ultra-efficient Class D power for the bass channel. The amp comes equipped with FIT� (Fail-Safe Integration Technology) � giving you superior power, clarity and dependability. An enormous 12dB of variable bass boost with KickEQ lets you get as much as a 12dB of extra bump with a simple turn of the knob. A powerful 12dB DSP (digital signal processor) controlled crossover and 24dB subsonic filter is also included, letting you quickly tune your entire system. Fuse rating: 80A Cable guage: 4 AWG This DX amplifier delivers as much as 75 watts per channel (4 channels driven), or 150 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 300 watts. See below for more details. RMS Power - 14.4V 2 Ohm Stereo = 1% THD+N : 75 W x 4 - 14.4V 4 Ohm Bridged = 1% THD+N : 150 W x 2 - 14.4V 2 Ohm mono = 1% THD+N : 300 W x 1 - Length - 14" (36 cm) - Height - 2 3/8" (6 cm) - Width - 7 3/16" (18 cm) - Frequency Response - Full Range 10-20k Hz - Frequency Response - Subwoofer 25-200 Hz - Signal-to-Noise Ratio - >90dB A-weighted, re: rated power - Input Sensitivity Low Level - 125mV-5V - Input Sensitivity High Level - 250mV-10V - Crossover - Active - Subsonic Filter - Variable 25Hz, 24dB/octave - KickEQ Boost - variable +12dB, centred at 40 Hz - Remote Bass - sold sep part number KA43CXARC

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. The CX 600.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class D power plant and FIT (Failsafe Integration Technology) for superior dependability, this amp features a variable bass boost with KickEQ, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system. Fuse rating: 80A Cable guage: 4 AWG This CX amplifier delivers as much as 600 watts into one channel. See below for more details. RMS Power - 14.4V 2 Ohm mono = 1% THD+N : 600 W x 1 - Length - 8 1/8" (21 cm) - Height - 2 3/8" (6 cm) - Width - 7 3/16" (18 cm) - Frequency Response - 25-200 Hz (+/- 1 dB) - Signal-to-Noise Ratio - >95dB A-weighted, re: rated power - Input Sensitivity Low Level - 125mV-5V - Input Sensitivity High Level - 250mV-10V - Active Crossover - 50-200 Hz, 12dB/octave low pass only - Subsonic Filter - 25 Hz, 24dB/octave - KickEQ Boost - variable +12dB, centred at 40 Hz - Remote Bass - Sold Seperately

DX-Series Amplifiers deliver all the power, features and value you need - with an impact that's all Kicker. The 2016 DXA250.1 Mono Amplifier is built for big bass in a small package, for easy mounting under or behind a seat. This amp features a variable bass boost with KickEQ, giving you as much as a 12dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. Use FIT (Fail-Safe Integration Technology) to easily connect with a factory or aftermarket radio - no external converter needed. Fuse rating: 40A Cable guage: 8 AWG This DX amplifier delivers as much as 250 watts into one channel. See below for more details. RMS Power - 14.4V 4 Ohm mono = 1% THD+N : 125 W x 1 - 14.4V 2 Ohm mono = 1% THD+N : 250 W x 1 - Length - 8 1/8" (21 cm) - Height - 2 3/8" (6 cm) - Width - 7 3/16" (18 cm) - Frequency Response - 25-200 Hz (+/- 1 dB) - Signal-to-Noise Ratio - >95dB A-weighted, re: rated power - Input Sensitivity Low Level - 125mV-5V - Input Sensitivity High Level - 250mV-10V - Electronic Crossover - Variable Lo-pass 50-200Hz, 24dB/octave - KickEQ Bass Boost - Variable 0-12dB at 40 Hz - Subsonic Filter - 24Hz, 24dB/octave - Amp Turn On - +12V and DC Offset - Remote Bass - Sold Seperately

DX-Series Amplifiers deliver all the power, features and value you need - with an impact that's all Kicker. The 2016 DXA500.1 Mono Amplifier is built for big bass in a small package. This powerhouse combines the brute force of a Class D power plant with FIT (Fail-Safe Integration Technology) for superior wiring flexibility. A 12dB crossover and 24dB subsonic filter is also included, letting you quickly tune your system to perfection. Fuse rating: 80A Cable guage: 4 AWG This DX amplifier delivers as much as 500 watts into one channel. See below for more details. RMS Power - 14.4V 4 Ohm mono = 1% THD+N : 250 W x 1 - 14.4V 2 Ohm mono = 1% THD+N : 500 W x 1 - Length - 8 1/8" (21 cm) - Height - 2 3/8" (6 cm) - Width - 7 3/16" (18 cm) - Frequency Response - 25-200 Hz (+/- 1 dB) - Signal-to-Noise Ratio - >95dB A-weighted, re: rated power - Input Sensitivity Low Level - 125mV-5V - Input Sensitivity High Level - 250mV-10V - Electronic Crossover - Variable Lo-pass 50-200Hz, 24dB/octave - KickEQ Bass Boost - Variable 0-12dB at 40 Hz - Subsonic Filter - 25Hz, 24dB/octave - Amp Turn On - +12V and DC Offset - Remote Bass - Sold Seperately