Enclosures

With MicroSub+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 drivers. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosures performance is its efficient slot-ported design and precise tuning of its dual 8Wv3 subwoofer drivers, each in its separate airspace. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through each port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the drivers seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Finish: Black, high-grade automotive carpet with silver "JL AUDIO Built In USA" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Remeber to add an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the drivers seat Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD Class D amplifier (500 W @ 0.20 Ohm) Nominal Impedance: 0.20 Ohm Enclosure and Subwoofer Made in USA External Width (W) 36.625 in / 905 mm External Height (H) 11.125 in / 283 mm External Depth (D1) 5.125 in / 130 mm Net Weight 34.9 lb / 15.83 kg High-level input plug configuration Top left: Right - Bottom left: Right + Top right: Left - Bottom right: Left +

Enclosed Subwoofer System with Dual 10W0v3-4 Subwoofer Drivers (600 W, 2 Ohm) Dark Gray Carpet Ported Enclosure This powerful slot-ported BassWedge subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge" embroidered on the port mouth. Recommended amplifier power: 150 - 600W Nominal Impedance: 2 Ohm Construction: MDF Dimensions Width - 29.61 in / 752 mm Height - 13.77 in / 350 mm Depth - 17.38 in / 441 mm Net Weight 50.7 lb / 23 kg Recomended Amplifier XD600/1v2 RD500.1 JX500.1D

'- Die-cast housing - Max power output at 14.4V: 500 Watts / 4 Ohm - RMS output at 14.4V: 100 Watts / 4 Ohm - RCA input 130mV - 2V - Input level control - Short circuit protection - Thermal protection - Full range / low pass 50Hz - 160Hz - Phase switch 0 -