Front Row Digital Signal Processor
KICKER Signal Processors are all about customizing your sound. Use this gear to make your system sing!
The Front Row is a 6-channel digital signal processor that allows you to engineer music the way you've always wanted to hear it.
The Front Row utilizes an included remote control, with a simple series of analog knobs; but underneath the dials lay a powerful micro-processor with all the signal processing done in the digital domain (28-/56-bit, double-precision DSP with 24-bit AD/DA converters). Tune your sound to experience staging, imaging and bass with a sense of realism you have never heard before. All with the twist of a knob!
SPECIFICATIONS
50 MHz CPU / 28-/56-bit double-precision DSP / 24-bit AD/DA converters
- Frequency Response (Hz) - 10-22k, +/-0.2dB
- Signal-to-Noise Ratio - 110dB
- THD - 0.004%
32-step variable crossovers with 12, 24 or 48dB/octave slopes
- Front - high-pass 0-500Hz or 0-5kHz (10x switch)
- Rear - high-pass 0-500Hz
- Rear - low-pass 50-500Hz or 500-5kHz (10x switch)
- Sub - subsonic filter 0-80Hz, fixed at 48dB/octave
- Sub - low-pass 40-160Hz
- Subwoofer Phase - variable 0-180 degrees
- KickEQ - variable 0-+15dB at 45Hz, Q=3
- SHOCwave - variable bass restoration
Load Sensing Adaptor for use with JLFiX-82
Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load like the input section of the FiX-82 or 86 is connected to these factory amplifiers, the audio signal will mute.
The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the FiX input connectors, insert the LSA in-line and recalibrate the FiX with the LSA in place.
OEM Integration DSP with Automatic Digital Equaliser – 2 Channel Stereo Output
In certain luxury vehicles with factory audio upgrades it is important to understand the effect of active noise cancellation (ANC) microphones. For further information on how this may affect the install please contact JL Audio technical support in the U.S on +1 954 443 1100 following prompts for car audio technical support.
Great sound using the OEM source has
never been this easy to achieve! Groundbreaking delay correction makes FiX unique among integration processors, ensuring correct summing and equalization of factory signals.
The FiX 82 is a state-of-the-art digital signal processor engineered to deliver world-class sound from factory audio systems, without replacing the OEM source unit. Unlike other OEM interface products, the FiX 82 is the first DSP to automatically correct time delayed factory outputs prior to signal summing and EQ correction.
With a powerful 24-bit DSP processor and dual 1/3 octave equalizers onboard, complex 2-way, 3-way and 4-way factory audio outputs are combined and level-matched automatically into a flat, full-range stereo signal. Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS).
Calibration is initiated with just a single button press and takes only about 30 seconds to complete, with no special equipment needed. Output options include dual RCA jacks (4V RMS) or a digital optical (Toslink) output, supporting PCM audio (S/PDIF) 24 bit/48 kHz. Activation methods include 12-volt or automatic (Signal/DC-Offset Sensing), plus a dedicated remote turn-on output is on-hand for controlling your aftermarket equipment.
Connect the optional DRC-100 Digital Remote Controller (sold separately) to add Master Volume Control capabilities and preserve your vehicle's handsfree calling features, if equipped, all from the driver's seat. Clipped input signals and overall condition are also reported via the DRC-100's multi-color status LED.
Achieving great sound from your factory stereo has never been easier, or sounded better.
Power Supply Type: Regulated DC-DC SMPS
Input Operating Voltage: 10 - 16 VDC
Standby Current Draw: <1.5 mA
Operating Current Draw: 0.7 A
Recommended Fuse Value: 1 A
Input Channels: Eight
Input Type: Differential-Balanced
Input Voltage Range: 250 mV - 30 V RMS
Minimum Input Voltage: 10 mV RMS
Input Level Setting: Fully automatic
Output Channels: Two
Analog Output: Unbalanced, stereo RCA jacks
Digital Output: Optical (Toslink) output (S/PDIF)
Output Impedance: 450 Ohms
S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output)
THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz)
Audio Resolution: 24 bit / 48 kHz
Number of EQ Bands: 30 x 2 channels
EQ Resolution: 1/3 octave (25 Hz - 20 kHz)
Remote Level Control: Optional (DRC-100)
Remote Level Functions: Master Volume Control, Handsfree Optimization, LED Status Reporting
Height (H): 1.85 in / 47 mm
Width (W): 4.29 in / 109 mm
Depth (D): 6.14 in / 156 mm
Net Weight: 2.58 lb / 1.17 kg
OEM Integration DSP with Automatic Digital Equaliser – 4+2 Channel Output
In certain luxury vehicles with factory audio upgrades it is important to understand the effect of active noise cancellation (ANC) microphones. For further information on how this may affect the install please contact JL Audio technical support in the U.S on +1 954 443 1100 following prompts for car audio technical support.
Great sound using the OEM source has
never been this easy to achieve! Groundbreaking delay correction makes FiX unique among integration processors, ensuring correct summing and equalization of factory signals.
The FiX 86 is a state-of-the-art digital signal processor engineered to deliver outstanding sound from factory source units, while retaining OEM fader control. Unlike typical OEM interface products, the FiX 86 automatically corrects time-delayed factory outputs prior to signal summing and EQ correction. Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed.
With a powerful 24-bit DSP processor and quad 1/3 octave equalizers onboard, complex factory signals, up to 3-way front and 2-way rear, are combined and level matched automatically into six, full-range stereo signals: Front (fader-controlled), Rear (fader-controlled) and Subwoofer (non-fading, front+rear summed) outputs. Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to highpower, amplified speaker-level outputs (up to 30V RMS).
Activation methods include 12-volt or Auto Turn-On (Signal/DC-Offset Sensing) to trigger a dedicated remote turn-on output for aftermarket equipment. An optional DRC-100 or DRC-200 Digital Remote Controller (sold separately) adds Master Volume Control, Subwoofer Level Control and preserves hands-free calling features, all from the driver's seat.
Achieving great sound from your factory stereo has never been easier, or sounded better... Now with fader retention and subwoofer output!
Power Supply Type: Regulated DC-DC SMPS
Input Operating Voltage: 10 - 16 VDC
Standby Current Draw: <1.5 mA
Operating Current Draw: 0.7 A
Recommended Fuse Value: 1 A
Input Channels: Eight
Input Type: Differential-Balanced
Input Voltage Range: 250 mV - 30 V RMS
Minimum Input Voltage: 10 mV RMS
Input Level Setting: Fully automatic
Output Channels: Six (Front/Rear/Sub Output Pairs)
Analog Output: Unbalanced, stereo RCA jacks
Digital Output: N/A
Output Impedance: 450 Ohms
S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output)
THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz)
Audio Resolution: 24 bit / 48 kHz
Number of EQ Bands: 30 x 2 channels
EQ Resolution: 1/3 octave (25 Hz - 20 kHz)
Remote Level Control: Optional (DRC-100 or DRC-200)
Remote Level Functions: Master Volume Control, Handsfree Optimization, LED Status Reporting (DRC-200 adds Subwoofer Level Control)
Height (H): 1.85 in / 47 mm
Width (W): 4.29 in / 109 mm
Depth (D): 6.14 in / 156 mm
Net Weight: 2.58 lb / 1.17 kg
Signal Summing Interface
KICKER Signal Processors are all about customising your sound. Use this gear to make your system sing!
The ZXSUM8 Summing Interface provides complete integration of aftermarket audio products into a vehicle's factory audio system, while adding a handy auxiliary-input jack.
Your factory signal is split. This speaker gets some of the bass. The other gets some of the treble, None of them get the whole acoustic story. The KICKER ZXSUM8 takes your factory speaker signal and combines it into a single, complete sound. Now your amps finally have every note they've always wanted.
- Max Voltage In - 40 Vrms
- Max Aux-In Voltage - 40 Vrms
- Max Voltage Out (Chan. 1-3) - 9 Vrms
- Max Voltage Out (Chan. 4) - 6 Vrms
- Signal-to-Noise Ratio (Chan. 1-3) - 90 1V: dB
- Signal-to-Noise Ratio (Chan. 4) - 90 1V, < 200Hz: dB
- Remote Attenuation Range - 0 to -27 dB
- Frequency Response - 20 - 22,000 Hz
- Gain Range (Ch1, 2, 3, 4) - -30 to +4 dB
- Gain Range (Aux Input) - -65 to +18 dB
- Fuse - 2 Amps
- Width - 10-1/2" (26.5 cm)
- Depth - 5-3/4" (14.6 cm)
- Height - 1-3/8" (3.5 cm)
System Tuning DSP Controlled By Tun Software – Analog & Digital Input
In certain luxury vehicles with factory audio upgrades it is important to understand the effect of active noise cancellation (ANC) microphones. For further information on how this may affect the install please contact JL Audio technical support in the U.S on +1 954 443 1100 following prompts for car audio technical support.
The TwK 88 is a state-of-the-art digital signal processor engineered to deliver world-class system tuning capabilities, in an easy-to-use format. Equipped with an advanced 24-bit DSP processor, the TwK 88 includes flexible input/output options, 80 total bands of equalization and powerful mixing tools. The included DRC-200 Digital Remote Controller lets you add dual configurable level controls, preset toggle, plus LED status reporting, all from the driver's seat.
Connect your TwK via PC to the companion TuN Software Interface to take advantage these powerful features:
Flexible input design:
- 8 Differential-balanced, line-level input jacks (RCA) accept most line-level signals up to 7.1V (RMS)
- Separate optical (Toslink) and coaxial digital inputs connect to any digital (S/PDIF) output.
Flexible setup features:
- Individual level trim, linkable for tuning
- Individual polarity controls, linkable for tuning
- Powerful input mixing tools
8 Powerful 10-band equalizers with flexible assignment capabilities:
- 10-band graphic full octave EQ
- 10-band parametric EQ
Configurable EQ assignment delivers simple to complex tuning options:
- Individual EQs may be assigned to each output
- Multiple outputs may be combined and assigned to a single EQ
8 analog, line-level RCA output jacks (4V RMS), each with a full-featured tuning set:
- Fully variable, high-pass and low-pass filters with selectable slopes from 6 dB/octave to 48 dB/octave (in 6 dB/octave increments)
- Configurable delay settings, with separate entries for speaker distance plus offset control; expressed in time or distance units and fully linkable with other channels
- Polarity control, fully linkable with other channels
- Comprehensive level controls, fully linkable with other channels
Optical (Toslink) jack provides a pass-through digital audio (S/PDIF) output from assignable input channels, with no signal processing applied.
Provides a dedicated remote turn-on voltage output for activating aftermarket audio equipment.
JLid Port allows connection of the included DRC-200 Digital Remote Controller to add dual configurable level controls, plus LED status reporting from the driver's seat.
Power Supply Type: Regulated DC-DC SMPS
Input Operating Voltage: 10 - 16 VDC
Standby Current Draw: <1.5 mA
Operating Current Draw: 0.7 A
Recommended Fuse Value: 1 A
Input Channels: Eight
Input Type: Line-level, Differential-Balanced
Input Voltage Range: 250 mV - 7.1 V RMS
Minimum Input Voltage: 10 mV RMS
Input Level Setting: Eleven discrete selections from 250 mV - 7.1V RMS
Output Channels: Eight
Analog Output: Unbalanced, stereo RCA jacks
Digital Output: Optical (Toslink) output (S/PDIF)
Output Impedance: 450 Ohms
S/N Ratio: 98 dB (A-Weighted, referred to 4V RMS Output)
THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz)
Audio Resolution: 24 bit / 48 kHz
Number of EQ Bands: 10 x 8 Channels
Remote Level Control: Included (DRC-200)
Remote Level Functions: Master Volume Control + Trim; Master Volume Control + Fader; Zone Control, LED Status Reporting
Height (H): 1.85 in / 47 mm
Width (W): 4.29 in / 109 mm
Depth (D): 6.14 in / 156 mm
Net Weight: 2.58 lb / 1.17 kg
System Tuning DSP Controlled By Tun Software – Digital Input
In certain luxury vehicles with factory audio upgrades it is important to understand the effect of active noise cancellation (ANC) microphones. For further information on how this may affect the install please contact JL Audio technical support in the U.S on +1 954 443 1100 following prompts for car audio technical support.
The TwK D8 is a state-of-the-art digital signal processor engineered to deliver world-class system tuning capabilities, in an easy-to-use format.
Equipped with an advanced 24-bit DSP processor, the TwK D8 is equipped with a digital optical (Toslink) input and connects directly to our FiX 82 OEM Integration DSP, or any 2-channel digital (S/PDIF) output, to maintain an all-digital signal path. Functionally identical to the TwK 88, the TwK D8 is also equipped with flexible input/output options, 80 total bands of equalization and powerful mixing tools. The included DRC-200 Digital Remote Controller lets you add dual configurable level controls, preset toggle, plus LED status reporting, all from the driver's seat.
Connect your TwK via PC to the companion TuN Software Interface to take advantage these powerful features:
All-digital, optical (Toslink) input connects directly to any digital (S/PDIF) output.
Flexible setup features:
- Individual level trim, linkable for tuning
- Individual polarity controls, linkable for tuning
- Powerful input mixing tools
8 Powerful 10-band equalizers with flexible assignment capabilities:
- 10-band graphic full octave EQ
- 10-band parametric EQ
Configurable EQ assignment delivers simple to complex tuning options:
- Individual EQs may be assigned to each output
- Multiple outputs may be combined and assigned to a single EQ
8 analog, line-level RCA output jacks (4V RMS), each with a full-featured tuning set:
- Fully variable, high-pass and low-pass filters with selectable slopes from 6 dB/octave to 48 dB/octave (in 6 dB/octave increments)
- Configurable delay settings, with separate entries for speaker distance plus offset control; expressed in time or distance units and fully linkable with other channels
- Polarity control, fully linkable with other channels
- Comprehensive level controls, fully linkable with other channels
Optical (Toslink) jack provides a pass-through digital audio (S/PDIF) output from assignable input channels, with no signal processing applied.
Provides a dedicated remote turn-on voltage output for activating aftermarket audio equipment.
JLid Port allows connection of the included DRC-200 Digital Remote Controller to add dual configurable level controls, plus LED status reporting from the driver's seat.