MENUMENU

10″ dia. W1 Poly Subwoofer 300W @ 4 Ohm

10″ dia. W1 Poly Subwoofer 300W @ 4 Ohm

£199.99

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
Continuous Power Handling (RMS): 300W
Recommended RMS Amplifier Power: 75 – 300W
Nominal Impedance (Znom): 4 Ohms
Recomended Amplifier
JX500/1D
MX500/1
RD500/1

Categories: , , Tag:

Description

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
Continuous Power Handling (RMS): 300W
Recommended RMS Amplifier Power: 75 – 300W
Nominal Impedance (Znom): 4 Ohms
Recomended Amplifier
JX500/1D
MX500/1
RD500/1

Reviews

There are no reviews yet.

Be the first to review “10″ dia. W1 Poly Subwoofer 300W @ 4 Ohm”

Your email address will not be published. Required fields are marked *