If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.

The 10W6v3 is best used with amplifier power in the 200W – 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space. Detailed enclosure recommendations can be found in the “Specifications” tab.

Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch subwoofer driver, allowing for higher output. Dual 4 O voice coils permit deploying the W6v2 as a 2 O or 8 O driver

Continuous Power Handling (RMS) 600W

Recommended RMS Amplifier Power 200 – 600 W

Nominal Impedance (Znom) Dual 4 Ohm

Nominal Diameter 10.0 in / 250 mm

Overall Diameter (A) 10.5 in / 267 mm

Mounting Hole Diameter (B) 9.02 in / 229 mm

Bolt Hole Circle (C) 9.86 in / 250 mm

Magnet Diameter (D) 6.3 in / 160 mm

Mounting Depth (E) 6.89 in / 175 mm

Required Pole Vent Clearance 0.50 in / 13 mm

Driver Displacement 0.078 cu ft / 2.1 L

Net Weight 20 lb / 9.1 kg