DX-Series Amplifiers deliver all the power, features and value you need – with an impact that’s all Kicker
The DXA250.4 Four-Channel Amplifier is a perfect solution for all of your door speakers, or a bumpin’ three-way system for a two seater.
Use FIT (Fail-Safe Integration Technology) to install this amp in any ride – with or without a factory radio. For even more bass, use KickEQ for up to 12dB of extra bump!
Fuse rating: 60A
Cable guage: 8 AWG
This DX amplifier delivers as much as 60 watts per channel (4 channels driven), or 125 watts into two sets of bridged channels. See below for more details.
RMS Power
– 14.4V 4 Ohm = 1% THD+N : 30 W x 4
– 14.4V 2 Ohm = 1% THD+N : 60 W x 4
– 14.4V 4 Ohm = 1% THD+N : 125 W x 2
– Length – 12 7/16″ (32 cm)
– Height – 2 3/8″ (6 cm)
– Width – 7 3/16″ (18 cm)
– Frequency Response – 10-20K Hz (+/- 1 dB)
– Signal-to-Noise Ratio – >95dB A-weighted, re: rated power
– Input Sensitivity Low Level – 125mV-5V
– Input Sensitivity High Level – 250mV-10V
– Electronic Crossover – Variable Lo-pass 50-200Hz, 12dB/octave
– KickEQ Bass Boost – Variable 0-12dB at 40 Hz
– Amp Turn On – +12V and DC Offset
– Remote Bass – Not Applicable
DX 250W 4 Channel Class D Full-Range Amplifier
£ 179.99
DX-Series Amplifiers deliver all the power, features and value you need – with an impact that’s all Kicker
The DXA250.4 Four-Channel Amplifier is a perfect solution for all of your door speakers, or a bumpin’ three-way system for a two seater.
Use FIT (Fail-Safe Integration Technology) to install this amp in any ride – with or without a factory radio. For even more bass, use KickEQ for up to 12dB of extra bump!
Fuse rating: 60A
Cable guage: 8 AWG
This DX amplifier delivers as much as 60 watts per channel (4 channels driven), or 125 watts into two sets of bridged channels. See below for more details.
RMS Power
– 14.4V 4 Ohm = 1% THD+N : 30 W x 4
– 14.4V 2 Ohm = 1% THD+N : 60 W x 4
– 14.4V 4 Ohm = 1% THD+N : 125 W x 2
– Length – 12 7/16″ (32 cm)
– Height – 2 3/8″ (6 cm)
– Width – 7 3/16″ (18 cm)
– Frequency Response – 10-20K Hz (+/- 1 dB)
– Signal-to-Noise Ratio – >95dB A-weighted, re: rated power
– Input Sensitivity Low Level – 125mV-5V
– Input Sensitivity High Level – 250mV-10V
– Electronic Crossover – Variable Lo-pass 50-200Hz, 12dB/octave
– KickEQ Bass Boost – Variable 0-12dB at 40 Hz
– Amp Turn On – +12V and DC Offset
– Remote Bass – Not Applicable
Related products
10″ dia. W0 Subwoofer 300W @ 4 Ohm
Slash v3 1200W Monoblock Class D Subwoofer Amplifier
10″ dia. W1 Poly Subwoofer 300W @ 4 Ohm
12″ dia. TW3 Thin-line Subwoofer 400W Dual 4 Ohm
12″ dia. W3 Poly Subwoofer 500W @ 4 Ohm
10″ dia. W6 Poly Subwoofer 600W Dual 4 Ohm
10″ dia. W3 Poly Subwoofer 500W @ 4 Ohm
12″ dia. W0 Subwoofer 300W @ 4 Ohm
- Menu
- Categories
Reviews
There are no reviews yet.