These all-new IQ Amplifiers are best described as very complex and technically “cutting-edge” while being remarkably easy and rewarding to use.
The IQ1000.5 Five Channel Amplifier is an entire system in a single, stunningly simple chassis.
At under a foot long and barely two inches high, this Class D powerhouse is ready to turn your ride into a mobile concert, with all the control and customization of a professional mixer.
The IQ1000.5 delivers 65 watts x 4 at 4 Ohm and 125 watts x 4 at 2 Ohm for the AMP1 and AMP2 Channels. The SUB channel delivers 250 watts at 4 Ohm and 500 watts at 2 Ohm. See below for more details.
All IQ amplifiers come with the revolutionary TWEEQ tuning software. Available as a free app for PC, iOS and Android, this tuning system allows you the freedom to dial in your perfect sound – without buying or installing a separate processor.
Equipped with a simple walk-through configuration process, TWEEQ includes every tool you need to craft a truly excellent sonic environment. A graphic speaker selection menu, +/- 12dB equalizer with 31-bands, adjustable 24dB crossover and time alignment is all included for every channel of the amp. Access the Advanced settings for time delay controls, phase options, a full limiter/compressor, and input mixer to make your sound stage as unique as you are.
Want to TWEEQ your system wirelessly? Simply add the IQI Intelligent Interface and control as many as four IQ amplifiers with Bluetooth!
Fuse rating: 100A
Cable guage: 1/0 AWG pure copper wire
RMS Power Full-Range
– 14.4V 4 Ohm = 1% THD+N : 65 W x 4
– 14.4V 2 Ohm = 1% THD+N : 125 W x 4
– 14.4V 4 Ohm mono = 1% THD+N : 250 W x 2
RMS Power Subwoofer
– 14.4V 4 Ohm mono = 1.5% THD+N : 250 x 1
– 14.4V 2 Ohm mono = 1.5% THD+N : 500 x 1
– Length – 11 15/16″ (30.3 cm)
– Height – 2 1/16″ (5.2 cm)
– Width – 7 9/16″ (19.1 cm)
– Frequency Response – Full Range 20-20k Hz
– Frequency Response – Subwoofer 25-180 Hz
– Signal-to-Noise Ratio – >95dB A-weighted, re: rated power
– Input Sensitivity Low Level – 125mV-5V
– Input Sensitivity High Level – 250mV-10V
– Crossover – Selectable Electronic
– Subsonic Filter – Variable 25Hz, 24dB/octave
– Remote Bass – Included
IQ 1000W 5 Channel Class D System Amplifier
£ 849.99
These all-new IQ Amplifiers are best described as very complex and technically “cutting-edge” while being remarkably easy and rewarding to use.
The IQ1000.5 Five Channel Amplifier is an entire system in a single, stunningly simple chassis.
At under a foot long and barely two inches high, this Class D powerhouse is ready to turn your ride into a mobile concert, with all the control and customization of a professional mixer.
The IQ1000.5 delivers 65 watts x 4 at 4 Ohm and 125 watts x 4 at 2 Ohm for the AMP1 and AMP2 Channels. The SUB channel delivers 250 watts at 4 Ohm and 500 watts at 2 Ohm. See below for more details.
All IQ amplifiers come with the revolutionary TWEEQ tuning software. Available as a free app for PC, iOS and Android, this tuning system allows you the freedom to dial in your perfect sound – without buying or installing a separate processor.
Equipped with a simple walk-through configuration process, TWEEQ includes every tool you need to craft a truly excellent sonic environment. A graphic speaker selection menu, +/- 12dB equalizer with 31-bands, adjustable 24dB crossover and time alignment is all included for every channel of the amp. Access the Advanced settings for time delay controls, phase options, a full limiter/compressor, and input mixer to make your sound stage as unique as you are.
Want to TWEEQ your system wirelessly? Simply add the IQI Intelligent Interface and control as many as four IQ amplifiers with Bluetooth!
Fuse rating: 100A
Cable guage: 1/0 AWG pure copper wire
RMS Power Full-Range
– 14.4V 4 Ohm = 1% THD+N : 65 W x 4
– 14.4V 2 Ohm = 1% THD+N : 125 W x 4
– 14.4V 4 Ohm mono = 1% THD+N : 250 W x 2
RMS Power Subwoofer
– 14.4V 4 Ohm mono = 1.5% THD+N : 250 x 1
– 14.4V 2 Ohm mono = 1.5% THD+N : 500 x 1
– Length – 11 15/16″ (30.3 cm)
– Height – 2 1/16″ (5.2 cm)
– Width – 7 9/16″ (19.1 cm)
– Frequency Response – Full Range 20-20k Hz
– Frequency Response – Subwoofer 25-180 Hz
– Signal-to-Noise Ratio – >95dB A-weighted, re: rated power
– Input Sensitivity Low Level – 125mV-5V
– Input Sensitivity High Level – 250mV-10V
– Crossover – Selectable Electronic
– Subsonic Filter – Variable 25Hz, 24dB/octave
– Remote Bass – Included
Related products
10″ dia. W3 Poly Subwoofer 500W @ 4 Ohm
10″ dia. W1 Poly Subwoofer 300W @ 4 Ohm
12″ dia. W0 Subwoofer 300W @ 4 Ohm
10″ dia. TW1 Thin-line Subwoofer 300W @ 4 Ohm
10″ dia. W7 Poly Subwoofer 750W @ 3 Ohm Anniversary Edition
10″ dia. W0 Subwoofer 300W @ 4 Ohm
10″ dia. W6 Poly Subwoofer 600W Dual 4 Ohm
12″ dia. TW1 Thin-line Subwoofer 300W @ 2 Ohm
- Menu
- Categories
Reviews
There are no reviews yet.