OEM Integration DSP with Automatic Digital Equaliser – 2 Channel Stereo Output

In certain luxury vehicles with factory audio upgrades it is important to understand the effect of active noise cancellation (ANC) microphones. For further information on how this may affect the install please contact JL Audio technical support in the U.S on +1 954 443 1100 following prompts for car audio technical support.
Great sound using the OEM source has
never been this easy to achieve! Groundbreaking delay correction makes FiX unique among integration processors, ensuring correct summing and equalization of factory signals.
The FiX 82 is a state-of-the-art digital signal processor engineered to deliver world-class sound from factory audio systems, without replacing the OEM source unit. Unlike other OEM interface products, the FiX 82 is the first DSP to automatically correct time delayed factory outputs prior to signal summing and EQ correction.
With a powerful 24-bit DSP processor and dual 1/3 octave equalizers onboard, complex 2-way, 3-way and 4-way factory audio outputs are combined and level-matched automatically into a flat, full-range stereo signal. Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS).
Calibration is initiated with just a single button press and takes only about 30 seconds to complete, with no special equipment needed. Output options include dual RCA jacks (4V RMS) or a digital optical (Toslink) output, supporting PCM audio (S/PDIF) 24 bit/48 kHz. Activation methods include 12-volt or automatic (Signal/DC-Offset Sensing), plus a dedicated remote turn-on output is on-hand for controlling your aftermarket equipment.
Connect the optional DRC-100 Digital Remote Controller (sold separately) to add Master Volume Control capabilities and preserve your vehicle’s handsfree calling features, if equipped, all from the driver’s seat. Clipped input signals and overall condition are also reported via the DRC-100’s multi-color status LED.
Achieving great sound from your factory stereo has never been easier, or sounded better.
Power Supply Type: Regulated DC-DC SMPS
Input Operating Voltage: 10 – 16 VDC
Standby Current Draw: <1.5 mA Operating Current Draw: 0.7 A Recommended Fuse Value: 1 A Input Channels: Eight Input Type: Differential-Balanced Input Voltage Range: 250 mV - 30 V RMS Minimum Input Voltage: 10 mV RMS Input Level Setting: Fully automatic Output Channels: Two Analog Output: Unbalanced, stereo RCA jacks Digital Output: Optical (Toslink) output (S/PDIF) Output Impedance: 450 Ohms S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output) THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz) Audio Resolution: 24 bit / 48 kHz Number of EQ Bands: 30 x 2 channels EQ Resolution: 1/3 octave (25 Hz - 20 kHz) Remote Level Control: Optional (DRC-100) Remote Level Functions: Master Volume Control, Handsfree Optimization, LED Status Reporting Height (H): 1.85 in / 47 mm Width (W): 4.29 in / 109 mm Depth (D): 6.14 in / 156 mm Net Weight: 2.58 lb / 1.17 kg