Auto World Online
101 Tonge Moor Road
Bl2 2DL
01204 53 43 33

The battery, starting and charging systems are interrelated by a continual cycle of converting chemical energy to mechanical energy and then back again. The starter motor uses mechanical energy to crank the engine and once the engine is running, it’s really a merry-go-round sort of relationship. The rotation of the engine drives the alternator, forcing electrical energy [current] into a battery, where it’s stored as chemical energy. The chemical energy of the battery is then changed back to electrical energy when it supplies current to the starter motor and accessories. The cycle repeats itself as the engine’s mechanical energy again drives the alternator to recharge the battery so it can supply more current to the starter when needed.

Maintenance Suggestions

The purpose of the battery is to supply the necessary current to the starter motor and the ignition system while cracking to start the engine. It also supplies additional current when the demand is higher than the alternator can supply and acts as an electrical reservoir.

The automotive battery, sometimes known as a lead-acid storage battery, is an electrochemical device that produces voltage and delivers current to start the vehicle. When the automobile is running the battery electrochemical action is reversed, recharging the battery, giving it many years of service.

Safer Operation

By having regular battery and starting / charging system checks every six months, you can identify many potential problems, before a failure occurs. During this test your technician should check battery condition, connections and alternator output. It is also important to regularly inspect the condition of the alternator drive belt and replace if necessary. An alternator drive belt that is slipping can damage the battery.

Without a properly functioning battery and charging system, your vehicle’s performance can be affected. Most modern vehicles are outfitted with computer controlled fuel delivery, ignition systems, transmissions, sensors and microprocessors and require a steady supply of controlled electricity to function properly.